Miranda Kaleido-X16 Instrukcje Operacyjne Pobierz pdf (Strona 19)

Kaleido-X16

Quick Start Guide

Step 2: Networking Setup

For the Kaleido-X16 multiviewer to join a TCP/IP network, it must be configured with an IP

address, a network mask, a gateway, and a system name. In addition, a client PC must be

configured to communicate with the multiviewer (

Configuring a Client PC, on page 12). You

must also configure any Kaleido-RCP2, and Audio Bridge Terminal units you may have

ordered.

The Kaleido-X16 is shipped with the following default settings:

Changing the IP Address from the Monitor Wall

The IP address, system name, and other parameters can be set via a control panel on the

monitor wall.

To change the IP address of the Kaleido-X16 from the monitor wall

1 Connect a mouse to one of the USB connectors of the Kaleido-X16.

2 Connect a keyboard to one of the USB connectors of the Kaleido-X16.

3 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a

monitor), and then click System configuration.

The System Configuration window appears.

4Click the Ethernet tab.

5 Type the required frame IP address, network mask, and gateway address in the

appropriate boxes.

6Click OK.

7 When prompted to restart the system to apply your changes, click Yes.

Finding the System IP Address and Application Version

To find the system IP address and application version

1 Connect a mouse to a USB connector: either the USB at the front of the frame or one of

the two USB connectors on the rear connector panel.

2 Right-click anywhere on the monitor wall. On the shortcut menu, point to Monitor wall

(if you clicked a monitor), and then click Show dashboard to display the dashboard

associated with the current head. A small window appears, revealing the frame IP

address and the system version. Take note of these values—they will be used later in

the configuration process.

System IP address 10.0.3.70

Network mask 255.255.0.0

Gateway 10.0.0.1

Note: If the IP address of the multiviewer has been changed (i.e. it no

longer corresponds to the as-shipped configuration), it is still possible to

determine the current setting. To determine the IP address of your

Kaleido-X16 multiviewer, see

Finding the System IP Address and Application

Version, below.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Brak uwag

Miranda Kaleido-X16 Instrukcje Operacyjne Strona 19