Miranda Kaleido-X Instrukcja Instalacji Pobierz pdf (Strona 30)

Kaleido-X (7RU) Installation

KXO-Dual Output Cards

The following table lists the purpose of each connector associated with card control.

The pinout for the RS-422 signal on the RJ-45 connector on the output cards’ rear panel,

and the wiring diagram for an appropriate adapters, are shown here:

DVI-D OUT 1 DVI-D OUT 2 DVI DVI digital output (no analog signal on this

connector)

RGBHV OUT 1 RGBHV OUT 2 DE-15S High-resolution analog component output

to feed the monitor wall display

ANALOG OUT 1 L ANALOG OUT 2 L WECO Analog audio output (left channel) to feed

the audio monitoring system

ANALOG OUT 1 R ANALOG OUT 2 R WECO Analog audio output (right channel) to

feed the audio monitoring system

AES OUT 1 AES OUT 2 WECO Digital audio output (AES) to feed the audio

monitoring system

OPTION 1 OPTION 2 RJ-45 (for future use)

Connector label Connector type Function

LTC IN 1 BNC Time code input #1

LTC IN 2 WECO Time code input #2

LTC IN 3 WECO Time code input #3

ETHERNET RJ-45 100 Base-T Ethernet connection

USB USB A Connect a mouse, keyboard, or USB key for software

upgrade or data backup

There are three other USB ports accessible on the front of

the card that serve the same functions.

RS-422 RJ-45 (see note

below)

Connect to an RS-422 (SMPTE ST 207, EBU-3245) or

RS-485 device or network

Note: The Kaleido-X’s RS-422 ports have an RJ-45 connector in order to

preserve space on a busy panel. The RS-422 interface specifies a DE-9

connector, so if you are using this interface, you will require a DE-9-to-RJ-45

adapter. Grass Valley supplies two adapter models, correctly wired for this

application: a straight adapter (part no. 1737-3000-102), and a crossover

adapter (part no. 1792-3700-100).

Connector label

Connector

type

FunctionHead 1 Head 2

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 96 97

Brak uwag

Miranda Kaleido-X Instrukcja Instalacji Strona 30