Miranda Kaleido-X Instrukcja Instalacji Pobierz pdf (Strona 57)

Kaleido-X (7RU)

Hardware Description & Installation Manual

5 Gently but firmly, slide one expansion card into the slot labelled OUTPUT D / EXP of the

Kaleido-X that will be designated Frame

6 Set the Frame ID switch on the rear panel to the Frame A position.

7 Gently but firmly, slide the other expansion card into the slot labelled OUTPUT D / EXP

of the Kaleido-X that will be designated Frame

8 Set the Frame ID switch on the rear panel to the FRAME B position.

9 Connect the two expansion cards using the expansion cables:

•EXP LINK 1 on Frame A to EXP LINK 1 on Frame B

•EXP LINK 2 on Frame A to EXP LINK 2 on Frame B

10 Power up both frames.

Note: Be careful to install the KXO-EXP-R rear panel in the matching

location at the rear of the frame. The KXO-EXP-F card and its rear panel can

be installed in any order.

See Card Installation and Replacement on page 14

for more information.

IMPORTANT

Make sure that there is a KXO card in Slot C of Frame A.

This card will act as the master for the expansion frame. Another output card

may become the master.

Frame ID switch

Connect EXP LINK 1 on FRAME A

to EXP LINK 1 on FRAME B

Connect EXP LINK 2 on FRAME B

to EXP LINK 2 on FRAME A

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 96 97

Brak uwag

Miranda Kaleido-X Instrukcja Instalacji Strona 57